“In God We Trust” Acrylic Leather Stamp – 3 inches wide

Overview Enhance your custom leatherwork and share a timeless message of faith and heritage. Specifically engineered for professional artisans and hobbyists alike, this “In God We Trust” Acrylic Stamp yields deep, perfectly leveled impressions on cased vegetable-tanned leather. Whether you are running a high-volume shop or assembling a unique personal project, this clear stamp guarantees flawless alignment with minimal effort. As perfectly demonstrated, the crisp, bold block lettering strikes deep into the grain to produce a striking, high-contrast finish. Key Features & Construction Heavy-Duty Build: Formed from rugged 1/4″ thick clear acrylic, which naturally allows you to look right through the tool to ensure dead-center positioning on your workpiece. Laser-Sharp Typeface: Features precisely engineered block text with exact spacing, meaning you will completely avoid messy ghosting lines or uneven depths. Streamlined Linear Layout: Designed specifically for long, narrow spaces, making it an excellent accent piece for specialized strap work. Specifications & Sizing Options Because different projects demand different scales, we provide multiple wider configurations so you can seamlessly match the layout of your leather canvases. Consequently, you can expand your design possibilities effortlessly. Base Size: 1/4″ (0.25″) Tall x 3″ Wide Expanded Sizes: Also available in extended widths of 4″, 5″, and 6″ wide. Thickness: 0.25″ (1/4 inch) high-density cast acrylic. ***SPECIAL NOTE: How to Use Your Stamp*** Important! Never use a hammer! We design this stamp for steady, even pressure, not sharp hits. Therefore, using a hammer will definitely break the acrylic stamp and cancel your lifetime guarantee. You must use an arbor press or a vise for the best impressions. First, remember that the leather needs to be cased (wetted). Use a wet sponge to moisten the entire piece of leather evenly. Otherwise, if you don’t wet all the leather, you will get water spots on the finished project. We create the images you see in this listing using a press and a thick piece of leather placed on top of the stamp to spread out the pressure. Arbor Press Instructions: Place your cased leather on a strong, solid surface directly under the press’s anvil. Put the stamp on top of the cased leather. Place a solid block (wood or metal works best) on top of the stamp. This helps to spread the pressure evenly. Apply slow, downward pressure with the press and hold it for 15-20 seconds. Check your result. Repeat as needed to get the perfect depth. Vise Instructions: Put your cased leather and the stamp between two hard objects, like a board. Squeeze them tightly so the stamp does not move. Place this setup inside your vise. Tighten the vise slowly and hold the pressure for 15-20 seconds. Release the vise and check how deep the imprint is. Repeat as necessary. This stamp includes a lifetime guarantee. If, for any reason, the stamp stops giving an acceptable image, simply return it, and we will send you a new one. However, the guarantee is void if you use the stamp with a hammer. Custom Logos Available: I have these stamps in stock and can also make custom logos for you. So, if you need a custom design, please send your black and white image to [email protected]. After I look at the image, I will let you know if I can produce it. Want to see how to prep your leather? Watch my video on proper casing here: [Link to your YouTube Video: https://www.youtube.com/pastorbobleather/]   Here is a category full of Stamps: