eLB11H sliding gate controller 230V 800W – soft start and stop

Description eLB11H 230V sliding gate controller – soft start/stop Driver eLB11H is an advanced control unit designed for sliding gate drives with a voltage-powered motor 230V ACThe device is suitable for both private gates and more intensive applications, such as residential and company parking lots, as well as entrances used daily by a large number of people. The eLB11H 230V sliding gate controller – soft start/stop – offers modern features that increase user comfort. The controller is equipped with a function smooth start and release, which makes the gate operate more smoothly, and the mechanical components of the drive are less susceptible to overload and wear. This solution increases user comfort and can extend the life of the entire gate mechanism. Model eLB11H works with remote controls compatible with the coding system KeeLoq®The use of a dynamically variable transmission code increases the level of security and reduces the risk of unauthorized copying of the remote control signal. The most important functions of the eLB11H controller The controller offers a number of practical functions that facilitate the daily use of the sliding gate: operation of 230V AC motors, soft start function, release function before the end of the gate movement, control of 433.92 MHz radio remote controls, support for up to 28 remote controls, KeeLoq® dynamic variable code, ability to control bell buttons, automatic closing function, "open only" function, gate function, traction force adjustment when working without an encoder, overload regulation when working with an encoder, working time regulation, remote programming of engine operation using a remote control, operation of the signal lamp with the flashing option, FOTO CLOSE function - shortening the auto-closing time after detecting passage, support for NC and NO type limit switches, possibility of connecting photocells, simple installation and programming procedure. Safe gate control The eLB11H control panel uses variable coding technology KeeLoq®, which means that each signal sent from the remote is dynamically changed. This makes the system much more difficult to copy than solutions using a fixed code. The controller works with remote controls on a frequency 433.92 MHz and has an integrated radio receiver. The operating range can be up to 200 meters, depending on the installation conditions, environment and antenna used. Comfortable gate operation The soft start and slowdown functions prevent the gate from starting or stopping abruptly. This is especially important for heavier sliding gates, where smooth operation affects the lifespan of the gears, rack, rollers, and other mechanical components. Thanks to the function auto-closing the gate can close automatically after a set time. Additionally, the function gates allows the gate to be partially opened, for example for pedestrian crossing. Technical data Controller power supply: AC 230V ±10%, 50HzMotor supply voltage: AC 230V ±10%, 50HzMaximum engine power: 500W / 0.5kWPower consumption in idle mode: below 3WOperating temperature range: from -20°C to 70°CRadio receiver: 433.92 MHz OOKTransmitter type: KeeLoq®Remote control memory: 28 pcs.Maximum working time: 120 secAuto-close time: 5 sec – 10 minLight on time: 15 sec – 25 minFuse: 5A / 230V, Ø 5×20Lamp output: 230V AC / 15W, do not use fluorescent lampsRadio range: up to 200 mAntenna input impedance: 50ΩAntenna: internalLibra: 464 gCase: lack Supported remote controls The controller works with, among others, the following remote controls: 2k433, 4k433, 2A433, 4A433, 4E433. Application The eLB11H controller is recommended for the automation of sliding gates in places such as: private properties, residential car parks, company entrances, service facilities, small industrial parking lots, gates used daily and intensively.